Features   ● 530 W motor delivers 35,000 RPM for smooth trimming and light routing applications ● Aluminum housing for higher durability ● Transparent base for a clear view of the trimming edge ● Top-mounted power cord stays out of the way for easier operation ● Compact with light weight     Specification     Continuous Rating Input : 530W Collet Capacity : 6 mm (1/4'') Plunge Capacity : 0 - 42 mm (0 - 1-5/8'') No Load Speed (RPM) : 35,000 Dimensions (L x W x H) : 82 x 90 x 199 mm (3-1/4'' x 3-1/2'' x 7-7/8'') Net Weight : 1.6 kg (3.5 lbs.) Power Supply Cord : 2.0 m (6.6 ft)     Standard equipment   Trimmer Guide, Straight Guide Assembly, Templet Guide, Straight Bit (733238A9), Chip Deflector, Wrench read more

Features   ● Maximum air volume of 2.9 m³/min for faster clean up in larger areas ● Ergonomic handle designed for increased operator comfort ● In-line grip for higher maneuverability ● Compact and lightweight for reduced operator fatigue ● On-tool storage for sash nozzle     Specification   Continuous Rating Input : 530W Air Volume : 1.2 - 2.9 m³/min No Load Speed (RPM) : 8,500 - 16,000 Dimensions (L x W x H) : 427 x 161 x 212 mm (16-3/4'' x 6-3/8'' x 8-3/8'') Net Weight : 1.5 kg (3.3 lbs.) Power Supply Cord : 2.0 m (6.6 ft)     Standard equipment   Nozzle Assembly, Sash Nozzle read more

Features   ● Slim and durable aluminium hammer case ● Compact design for perfect handling ● Externally accessible carbon brush ● No harm to the wrist when a screw is seated ● Enables to drive screws even without pre-drilling pilot holes     Specification     Continuous Rating Input : 230 W Capacity : Machine Screw: M4 - M8 (5/32'' - 5/16'')            Standard Bolt: M5 - M14 (3/16'' - 9/16'')            High Tensile Bolt: M5 - M10 (3/16'' - 3/8'')            Coarse Thread (in length): 22 - 90 mm (7/8'' - 3-1/2'') Driving Shank (Hex) : 6.35 mm (1/4'') Impacts Per Minute (IPM) : 0 - 3,200 Max Fastening Torque : 100 N·m (74 ft.lbs.) No Load Speed (RPM) : 0 - 3,600 Dimensions (L x W x H) : 184 x 67 x 192 mm (7-1/4'' x 2-5/8'' x 7-9/16'') Net Weight : 0.99 kg (2.2 lbs.) Power Supply Cord : 2.5 m (8.2 ft)     Standard Equipment   Philips Bit read more

Features   ● High performance and durability at less expense ● Satisfactory chipping performance ● Soft grip provides more comfort and control ● Compact and lightweight design for reduced operator fatigue ● Easy-to-hold barrel-chuck section for easier two-handed push chiseling     Specification   Continuous Rating Input : 900 W Impact Energy : 7.2J Impacts Per Minute (IPM) : 2,900 Dimensions (L x W x H) : 406 x 99 x 232 mm (16'' x 3-7/8'' x 9-1/8'') Net Weight : 5.4 k (12 lbs) Power Supply Cord : 2.5 m (8.2 ft)     Standard equipment   Bull Point, Side Grip read more

Features   ●High performance and durability at less expense ●Variable speed trigger allows operator to adjust speed based on materials or application ●Powerful 350 W motor for continuous operation ●In-line positive grip design maximises power thrust ●Compact and lightweight for reduced operator fatig     Specification     Continuous Rating Input : 350W Capacity : Steel: 10 mm (3/8'')            Wood: 20 mm (13/16'') No Load Speed (RPM) : 0 - 3,000 Dimensions (L x W x H) : 230 x 66 x 176 mm (9'' x 2-5/8'' x 6-15/16'') Net Weight : 1.2 kg (2.6 lbs.) Power Supply Cord : 2.0 m (6.6 ft)     Standard equipment   Chuck Key, Chuck Key Holder read more

Features   ●Side Switch for Operator Convenience ●Powerful 400W motor delivers 25,000 RPM to handle the most challenging applications ●Lower noise at 73dB(A) ●Small diameter barrel grip for added comfort ●Directional air-flow vents channel the tool's air output away from the user's face     Specification     Continuous Rating Input : 400 W Capacity : Collet: 3 mm (1/8”) | 6 mm (1/4'') Wheel Diameter : 38 mm (1 - 1/2'') No Load Speed (RPM) : 25,000 Dimensions (L x W x H) : 359 x 82 x 82 mm (14-1/8'' x 3-1/4'' x 3-1/4'') Net Weight : 1.68 - 1.84 kg (3.70 - 4.06 lbs.) Power Supply Cord : 2.5 m (8.2 ft)     Standard Equipment   Wrench x2 read more

Features   ●Designed as the premium polisher for professional polishing applications ●Fast and powerful for clear coat finishes ●Variable speed dial and trigger enable operator to adjust speed based on exact polishing application ●Ideal for maximum control during slow polish applications ●Electronic speed control maintains constant speed under load, critical for a professional finish     Specification   Continuous Rating Input : 1,200 W Capacity : Wool Pad: 180 mm (7'')            Wool Bonnet: 180 mm (7'') No Load Speed (RPM) : 0- 3,200 Dimensions (L x W x H) : 431 x 198 x 187 mm (17'' x 7-3/4'' x 7-3/8'') Net Weight : 3.2 - 3.4 kg (7 - 7.5 lbs.) Power Supply Cord : 2.5 m (8.2 ft)     Standard Equipment   Side Handle, Hex Wrench, Wool Pad read more

Features   ● Extended life brushes are longer for more work between service intervals and less downtime ● Speed and torque in reverse are the same as forward rotation by using brush holder unit ● One-touch sliding chuck for quick bit changes ● Recessed lock-on button for continuous use ● Variable speed control enables user to match the speed to the application     Specification     Continuous Rating Input : 780 W Impact Energy : EPTA-Procedure 05/2009: 2.4 J Capacity : Concrete: 24 mm (15/16'')            Core Bit: 54 mm (2-1/8'')            Steel: 13 mm (1/2'')            Wood: 32 mm (1-1/4'') Impacts Per Minute (IPM) : 0 - 4,500 No Load Speed (RPM) : 0 - 1,100 Dimensions (L x W x H) : 370 x 84 x 214 mm (14-1/2'' x 3-5/16'' x 8-3/8'') Net Weight : 2.9 - 3.3 kg (6.4 - 7.3 lbs.) Power Supply Cord : 2.5 m (8.2 ft)     Standard Equipment   Side Handle, Depth Gauge. Drill Chuck (194041-7), SDS-Plus Bit Set (D-17784), Bull Point (D-08713) read more